Topic: Anchor frame/custom bow roller

I need to mount/store a 25 lb. hinged plow, and perhaps a second anchor on my bow.  There is no roller there now and the drum for my roller furler would be in the way if I were to install typical anchor rollers.  Does anyone know if there is someone in the Barrie - Midland area that could make a custom frame similar to the one on Suselle?  Thanks.

Re: Anchor frame/custom bow roller

Yes, I'm liking that anchor frame.  I'm lucky that Suselle came with it.  I'll ask around in Penetang/Midland for a recommendation on a place to get one built and let you know if I come up with anything.  Sue

Re: Anchor frame/custom bow roller

Thanks, Susan.  That would be great. 

Carolyn

Re: Anchor frame/custom bow roller

5 (edited by Carolyn 2009-10-01 18:31:29)

Re: Anchor frame/custom bow roller

Thanks for the link to Stainless Outfitters. It looks promising. 

Does anyone use a Rocna anchor?  Any thoughts about its efficacy vs. a CQR?

Carolyn

Re: Anchor frame/custom bow roller

Check weldnshinedotcom/marine_wares.htm.  They have fabricated a s/s bow roller for the Contessa 26.  Photo's are on their website.

Ian