Topic: Sail Specs.
Thanks, Jose. I was about to copy your post on the PCBB and add it here.
You are not logged in. Please login or register.
The Contessa Corner → Sails & Rigging → Sail Specs.
Thanks, Jose. I was about to copy your post on the PCBB and add it here.
Is that for a JJT26?
My old super-baggy mainsail's luff & foot dims are: 23' 3" & 7' 10" Jeckyll's new luff/foot dims are 24' 0" and 8'6"
???
It appears that the specs above are for a JJT26. For some unexplained reason, there are definitely some differences between the CO26 & JJT26 sail plans.
PS. Hi Nigel.
Contessa 26 Sail Specs.
Data source: Brochure
I=31.50 J = 10.33 P = 28.00 E = 10.0
MAINSAIL SPECIFICATIONS: Area = 145.52 square feet
Luff (calculated) = 28.00 feet
Foot (calculated) = 10.00 feet
Diagonal (actual) = 29.54 feet
Head (calculated) = 0.40 feet
Leech (calculated) = 29.40 feet
Mainsail Tack Angle = 88.82 degrees
IOR rule battens (bottom to top): 30.00, 40.80, 40.80, 25.20 inches
115% JIBSAIL SPECIFICATIONS: Area = 157.52 square feet
Luff (calculated) = 26.52 feet
Foot (calculated) = 13.74 feet
Leech (calculated) = 22.93 feet
Jib deck angle = 12 degrees
Jib tack angle = 60 degrees
Jib LP = 11.88 feet
150% GENOA SPECIFICATIONS: Area = 243.99 square feet
Luff (calculated) = 31.49 feet
Luff is 95% of stay
Foot (calculated) = 16.73 feet
Leech (calculated) = 29.57 feet
Deck angle = 4 degrees
Tack angle = 68 degrees
Genoa LP = 15.50 feet
SPINNAKER SPECIFICATIONS: Area = 497.74 square feet
Stays (calculated) = 31.49 feet
Foot (calculated) = 18.59 feet
The Contessa Corner → Sails & Rigging → Sail Specs.
Powered by PunBB, supported by Informer Technologies, Inc.