• Registered: 2005-03-25
  • Posts: 19

Topic: Tiller size

Mine is 60" overall length and has a slight curve(up about 1" in the middle from the ends).  Also it is about 1-1/4" wide by 1-1/2" tall at the end.

  • From: Barrie, Ontario, Canada
  • Registered: 2005-10-10
  • Posts: 237

Re: Tiller size

Mine is similar. 58" long, curved top, tapering along its length to a 1" diameter round cross section at the end.

  • Registered: 2006-01-26
  • Posts: 19

Re: Tiller size

Thanks for the measurment.That helps alot,George

  • Registered: 2006-01-26
  • Posts: 19

Re: Tiller size

Does any on now the length of the tiller,as mine is missing most of it.Also is the top of it straight or is there a curve in it.I have the first 16 inches of it at the rudder so it will make it easier to make a new one.I bought the ash lumber and hope 7 ft will be enough.