Topic: Tiller size
Mine is 60" overall length and has a slight curve(up about 1" in the middle from the ends). Also it is about 1-1/4" wide by 1-1/2" tall at the end.
You are not logged in. Please login or register.
The Contessa Corner → General Questions/Comments → Tiller size
Mine is 60" overall length and has a slight curve(up about 1" in the middle from the ends). Also it is about 1-1/4" wide by 1-1/2" tall at the end.
Mine is similar. 58" long, curved top, tapering along its length to a 1" diameter round cross section at the end.
Thanks for the measurment.That helps alot,George
Does any on now the length of the tiller,as mine is missing most of it.Also is the top of it straight or is there a curve in it.I have the first 16 inches of it at the rudder so it will make it easier to make a new one.I bought the ash lumber and hope 7 ft will be enough.
The Contessa Corner → General Questions/Comments → Tiller size
Powered by PunBB, supported by Informer Technologies, Inc.